The Gulbransen Burbank was manufactured for H. W. Clarke Ltd by Collier & Beale Ltd in 1958.

6-valve broadcast-band set

Technical Information

Valves (6): 6BE6, ECH42, 6BA6, 6AV6, 6AQ5, 6X4

Intermediate Frequency: 455kc/s

Frequency Bands: 1

Chassis Notes(most schematics can be clicked to download a full size version)

Some chassis' are (incorrectly) labelled as 6154, most as Burbank.

Schematic notes that the screen resistor R17 is spec'd as a 10kΩ 1W - this is too small (noted by JWS?) - use a 3W resistor

Gulbransen Burbank Schematic

General Construction Notes for Collier & Beale Ltd:

Model numbering followed no real sensible scheme until around 1940 - and prior to 1934 apparently no model numbers were assigned at all.

From 1940 a 3- or 4-digit system was employed where the first digit indicates the number of valves, the second digit is the number of bands and the third is the year of manufacture.  From 1950 the last digit became two digits, eg: 5151 is a 5-valve broadcast-band only from 1951.

From 1957 model numbers were replaced with model names, ie the Pacemaker Buffalo - which makes the year of manufacture hard to determine unless service info is consulted (although C&B often released service info after the radio, and the date on the service info was for its release, not that of the model.