STATE 6LS MK2 (1935)

The State 6LS MK2 was manufactured for Wright, Stevenson & Co. Ltd by Collier & Beale Ltd in 1935.

6-valve dual-wave radio

First of the State models to use an aero dial.  Released just before Christmas in 1934 and advertised throughout 1935 as part of that years range.  Refered to as an 'All-Wave', although strictly a dual-wave set.  It would be the 1936 range that incorporated a 3-band truly all-wave set.

State Radio Advert, Evening Post, 29 NOVEMBER 1934
Evening Post, 29 NOVEMBER 1934

Technical Information

Valves (6): 6D6, 6A7, 6D6, 6B7, 42, 80

Intermediate Frequency: 465kc/s

Frequency Bands: 2

Chassis Notes(most schematics can be clicked to download a full size version)

Note the photographed model has been retrofitted with a 2A5 (and 2.5V heater transformer) in place of the 42 output valve.

1935 State 6LS MK2

1935 State 6LS MK2

Service information (CB_-_model_6LS_Series_2_6V_DW_AC_1935.pdf) here

General Construction Notes for Collier & Beale Ltd:

Model numbering followed no real sensible scheme until around 1940 - and prior to 1934 apparently no model numbers were assigned at all.

From 1940 a 3- or 4-digit system was employed where the first digit indicates the number of valves, the second digit is the number of bands and the third is the year of manufacture.  From 1950 the last digit became two digits, eg: 5151 is a 5-valve broadcast-band only from 1951.

From 1957 model numbers were replaced with model names, ie the Pacemaker Buffalo - which makes the year of manufacture hard to determine unless service info is consulted (although C&B often released service info after the radio, and the date on the service info was for its release, not that of the model.