STELLA MODEL S2 (CIRCA 1938)

The Stella model S2 was manufactured for Cory-Wright & Salmon Ltd by Collier & Beale Ltd in about 1938.

Other radios based on the same chassis:

5 valve broadcast band radio

Made for Cory-Wright & Salmon by Collier and Beale, after they parted ways with Radio Corp in 1937

Probably electrically equivalent to a Cromwell 5AV3

Technical Information

Valves (5): 6A7, 6D6, 6B7, 42, 80

Intermediate Frequency: 175kc/s

Frequency Bands: 1

Chassis Notes(most schematics can be clicked to download a full size version)

1938 Cromwell 5AV3 'Series 3'

1938 Cromwell 5AV3 'Series 3'

General Construction Notes for Collier & Beale Ltd:

Model numbering followed no real sensible scheme until around 1940 - and prior to 1934 apparently no model numbers were assigned at all.

From 1940 a 3- or 4-digit system was employed where the first digit indicates the number of valves, the second digit is the number of bands and the third is the year of manufacture.  From 1950 the last digit became two digits, eg: 5151 is a 5-valve broadcast-band only from 1951.

From 1957 model numbers were replaced with model names, ie the Pacemaker Buffalo - which makes the year of manufacture hard to determine unless service info is consulted (although C&B often released service info after the radio, and the date on the service info was for its release, not that of the model.

Other documented models using this chassis (2 in total)

YEARMODEL NAME
1938 Cromwell model 5AV3 'Super 5'