COURTENAY MODEL 62 (1940)

The Courtenay model 62 was manufactured for Turnbull & Jones Ltd by Radio Corporation of New Zealand Ltd in 1940.

Other radios based on the same chassis:

6-valve dual-wave tombstone radio. 

The dual-wave version of the model 63.

The 1940  'Defiant' series from Courtenay included some very interesting cabinet designs that were a throwback to the good old days at a time where cabinets were fast becoming bland rectangular boxes.  Certainly the tombstone-style was on the way out - but this model seems to have been 'one last hurrah' to that style.

Courtenay model 63

This looks more like a model 62 than the 63 all-wave it appears to be advertising.  It should be noted that the model 62 looks like it could be a predecessor to the model 66, and the chassis looks very similar to the early model 66's albeit without the semi-bandspread SW band.

Technical Information

Valves (6): KTW61, X65, KTW61, DH63, KT61, U50

Intermediate Frequency: 455kc/s

Frequency Bands: 2

Chassis Notes(most schematics can be clicked to download a full size version)

1940 Columbus model 62

1940 Columbus model 62

General Construction Notes for Radio Corporation of New Zealand Ltd:

The first digit of the serial number typically indicates the year of manufacture of RCNZ chassis' (although not the decade - that requires a little knowledge of the valves, construction, etc). Sets from around 1934 onwards were often (but not always) constructed in a distinctive pressed 'baking pan' style chassis, seemingly unique to RCNZ.

Model codes beginning with a 0, for example the model 051, are Osram valve versions of the model without the leading 0. Technically the 0 should be an O (for Osram), however the digit 0 was used throughout the site before this fact was discovered.

The E suffix indicates a magic eye option is fitted (in models which were available with or without, such as the model 25).

A and B suffixes appear to be simply updates to the current model, R also appears to be simply an updated model ('R'edesign, perhaps?)

P indicates either a permanent magnet speaker version of a model which also came with an electromagnet speaker (the model 26 for example), or a portable model (like the model 694P).  This suffix was used in the mid 50's when Radio Corp was changing over.

N and M indicated miniature valve versions of a model which started with all (or a mix, ie: model 5) of larger valves. One of these two codes may indicate a transitional mixture of octal and miniature - clarification is required.

S often indicates a stereo model.  It can also indicate 'self-biased' in the transition period between back-biased and self biased sets where there were models with both methods employed (53S for example)

Finally, other suffixes and prefixes make occasional appearances in the RCNZ lineup - like the 66W (a variant of the long-running model 66) and the 75XA (a 10-valve version of the model 75 with a separate amplifier chassis).

Model nicknames are often sourced from either newspaper advertising, company literature or the NZ Radio Traders Federation official trade-in price books (Particularly Courtenay models from this publication)

In 1954, model numbering changed, to begin with the number of valves (ie: 501 - 5 valves, 1006 - 10 valves, etc) although the final 2 digits don't appear to have much significance.  Middle digits of 5 (portable) or 6 (mantle, including clock radio) are used on the AWA-designed plastic-cased sets.

Other documented models using this chassis (2 in total)

YEARMODEL NAME
1940 Columbus model 62